Honeywell nvr ip search tool

broken image

Change the cam's IP to what you picked out, like 10.0.0.100 and click on save or apply.You should not need the plug-in for changing settings and BTW, that plug-in is downloaded generally from the cam itself, not the Internet. Write that unique IP down.that's what your going to change your cam to.Pick out an IP that is outside of that pool in other words, if router LAN is 10.0.0.1 and it's pool is 10.0.0.2 to 10.0.0.99, then use 10.0.0.100 to 10.0.0.200 as IP's for your static devices, like your cams.Check your router's DHCP pool (the pool of IP's it can assign to devices that are set to DHCP and not static).Put your PC back where it was (10.0.0.X and most likely set to DHCP) and log into router's LAN, likely 10.0.0.1.Click to expand.If the chinese cam is currently 10.0.0.2, then your router's LAN is likely 10.0.0.XXX, and VERY likely 10.0.0.1.

broken image